Instek PEL-3211H
Single-Channel Programmable DC Electronic Load Booster Unit (800V/105A/2100W) (Cannot Operate Alone)
PEL3211H
PEL-3211H
Instek PEL-3211H
Single-Channel Programmable DC Electronic Load Booster Unit (800V/105A/2100W) (Cannot Operate Alone)
PEL3211H
PEL-3211H
The Instek PEL-3211H Programmable DC Electronic Load is ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers along with high voltage devices such as EV/HEV in-vehicle chargers, DC/DC converters or high-voltage batteries.
- Number of Channels: 1
- Max Power: 2100W
- Max Voltage/Current: 800V/105A
- Parallel Connection of Inputs for Higher Capacity (Max: 9450W)
- Sequence Function
- Booster Unit (Cannot Operate Alone)
- 800V/105A/2100W
- Operating Mode: C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
- Parallel Connection of Inputs for Higher Capacity (Max. 9,450W)
- Support of High Slew Rate: Max. 0.84A/us
- Run Program Function (GO/NO GO Test)
- Sequence Function for High Efficient Load Simulations
- Dynamic (Switching) Function: 0.0166Hz -20kHz
- Soft Start Function: Off / On (1-200ms, Res: 1ms)
- Adjustable OCP / OVP / OPP / UVP Setting
- Short Circuit Function
- Timer function: Elapsed Time of load on
- Cut Off Time (Auto Load Off Timer): 1s to 999h 59min 59s or Off
- External Channel Control / Monitoring via Analog Control Connector
- Setup Memories: 100 sets
- 3.5 Inch TFT LCD Display
- Multi Interface: USB 2.0 Device / Host , RS-232 , GPIB (Optional)
The Instek PEL3211H Booster is designed to be used with the PEL-3111H Electronic Load for parallel load applications to increase the current sinking capacity. Up to 4 booster packs can be connected as slave units to a PEL-3111H, which acts as the master unit.
| Country of Origin | Taiwan, Province of China |
|---|---|
| Brand | Instek |
| Condition | NEW |
| Vendor Alias | PEL-3211H |
- 1 - Quick Start Guide
- 1 - CD (User Manual/ Programming Manual)
- 1 - Power Cord
- 1 - PEL-011 Load Input Terminal Cover
- 1 - PEL-012 Terminal Fittings Kits
- 1 - PEL-013 Flexible Terminal Cover
- 1 - PEL-014 J1/J2 Protection Plug
- 1 - Front Terminal Washers
- 1 - GTL-255 Frame Link Cable 300mm
