Instek MFG-2130M
30 MHz Single Channel Arbitrary Function Generator with Pulse Generator, Modulation
Instek MFG-2130M
30 MHz Single Channel Arbitrary Function Generator with Pulse Generator, Modulation
- 1 Equivalent Performance Arbitrary Channel Frequency : 1 Hz-30 MHz
- Modulation/Sweep/Burst/Frequency Counter
- Pulse Generator Frequency : 25 MHz
- 1 Equivalent Performance Arbitrary Channel Frequency : 1 Hz-30 MHz
- Modulation/Sweep/Burst/Frequency Counter
- Pulse Generator Frequency : 25 MHz
- True Point by Point Output Arbitrary Waveform Function : 200MSa/s
- 100 MHz Repetition Rate, 14-bit Resolution,16k Point Memory Depth
- Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
- Frequency Counter : 150 MHz, 8 bits
- AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
- 4.3 Inch TFT Color Display
The Instek MFG-2130M is a single-channel 30MHz ARB function generator with a pulse generator
The MFG-2130M has a Built-in pulse generator and its output frequency reaches 25 MHz. Users can set pulse width, duty cycle, rise edge time, and fall edge time to support trigger signal.
The AFG channel of the MFG2130M outputs sine, square, and triangle, etc. The MFG-2130M features true point-by-point output arbitrary waveform characteristics of 200 MSa/s sample rate, 100MHz waveform repetition rate, 14 bit resolution, and 16k point memory depth. Independent input/output power amplifier with 20W, 10dB, DC-100KHz bandwidth, and distortion less than 0.1% can be applied to the audio application.
The overall design of the MFG-2130M is earth ground isolation among output/input terminals and instrument chassis that can only be found in high-level signal sources. The output channels can sustain maximum isolation voltage up to ±42Vpk (DC+ AC peak value) to earth ground that is ideal for floating circuit tests. Multi-unit outputs can be executed without factoring in grounding reference issue. There is no additional isolation requirement for experiments such as "full-wave rectification" and "voltage doubler" which are easy and safe. An external power supply can bring up the DC bias voltage to ±42Vpk to meet the requirements of higher DC bias voltage such as automotive and educational applications.
The AFG of the MFG2130M collocating with AWES (Arbitrary Waveform Editing Software) allows users to easily and quickly edit arbitrary waveforms. DWR (Direct Waveform Reconstruction) allows users to collocate with GDS series digital oscilloscopes to retrieve waveforms and upload them to arbitrary generator to achieve direct waveform reconstruction. 66 built-in waveforms allow users to edit arbitrary waveforms and to output the whole segment or divided segments.
There are standard waveforms for the series such as sine, square, triangle, ramp, pulse, noise, DC voltage. In addition, 66 built-in waveforms allow users to easily select desired waveforms.
Country of Origin | China |
---|---|
Brand | Instek |
Condition | NEW |
Vendor Alias | MFG-2130M |
- 1 - Quick Start Guide
- 1 - CD-ROM with MFG Software and manual
- 1 - GTL-101 BNC-Alligator Test Lead