Lascar Electronics EL-P-VACX
High-Accuracy Calibratable Thermistor Probe with Glycol Bottle for Vaccine Monitoring
ELPVACX
EL-P-VACX
Lascar Electronics EL-P-VACX
High-Accuracy Calibratable Thermistor Probe with Glycol Bottle for Vaccine Monitoring
ELPVACX
EL-P-VACX
- For use with EL-WiFi-VACX or EL-WiFi-TPX+ data loggers only
- Can be calibrated (certificate sold separately) before replacing existing probe
- Probe in glycol buffer solution mimics temperature response of vaccine samples
- For use with EL-WiFi-VACX or EL-WiFi-TPX+ data loggers only
- Can be calibrated (certificate sold separately) before replacing existing probe
- Probe in glycol buffer solution mimics temperature response of vaccine samples
- Temperature measurement range: -40 to 140 °F (-40 to 60 °C)
- Measurement accuracy (typical): ±0.2°F (14 to 140 °F) / ±0.1°C (-10 to 60°C)
- Measurement accuracy (maximum): ±1.1°F (-40 to 140 °F) / ±0.6°C (-40 to 60°C)
- Cable length: 9.84 ft. (3 m)
- IP Rating: IP67 (not including data logger connector)
The Lascar Electronics EL-P-VACX High-Accuracy Calibratable Thermistor Probe is fitted within a glycol-filled bottle, designed to mimic the temperature response of vaccine samples. The high-accuracy calibratable temperature probe can be used to replace an existing EL-WiFi-VACX probe without the need to remove the data logger from service. This is the ideal solution for seamless re-calibration procedures.
Brand | Lascar |
---|---|
Condition | NEW |
- 1 - Thermistor Probe, 3m long
- 1 - Glycol-Filled Bottle