Lascar Electronics EL-WiFi-VACX
Wi-Fi Connected High-Accuracy Data Logger for Vaccine Temperature Monitoring, Visual and Audible Alarms, -40 to 140 °F
Lascar Electronics EL-WiFi-VACX
Wi-Fi Connected High-Accuracy Data Logger for Vaccine Temperature Monitoring, Visual and Audible Alarms, -40 to 140 °F
The Lascar Electronics EL-WiFi-VACX Wi-Fi Connected High-Accuracy Data Logger for Vaccine Temperature Monitoring, Visual and Audible Alarms, -40 to 140 °F, measures the temperature of a probe fitted within a glycol-filled bottle, designed to mimic the temperature response of vaccine samples.
- Temperature measurement range: -40 to 140 °F (-40 to 60 °C)
- Configurable alarm levels with on-board warning light and sounder
- Temperature measurement range: -40 to 140 °F (-40 to 60 °C)
- Configurable alarm levels with on-board warning light and sounder
- Supplied with glycol-filled probe to match temperature response of vaccines in storage
- Traceable calibration certificate supplied at 2 °C and 8 °C
- Wirelessly stream and view data on the EasyLog Cloud, including graphing of historic data
- Configure and receive alarm email notifications via EasyLog Cloud
- Easy to set up using free PC software or mobile app
- On-board memory stores all data even if Wi-Fi is temporarily disconnected
- No need to remove from service for recalibration, just replace the probe (additional units sold separaately)
- Wall mountable with included bracket
- Measurement resolution: 0.02°F (0.01°C)
- Measurement accuracy (typical): ±0.2°F (14 to 140 °F) / ±0.1°C (-10 to 60°C)
- Measurement accuracy (maximum): ±1.1°F (-40 to 140 °F) / ±0.6°C (-40 to 60°C)
- Logging period (user configurable): between 10 seconds and 12 hours
The Lascar Electronics EL-WiFi-VACX Wi-Fi Connected High-Accuracy Data Logger for Vaccine Temperature Monitoring, Visual and Audible Alarms, -40 to 140 °F, measures the temperature of a probe fitted within a glycol-filled bottle, designed to mimic the temperature response of vaccine samples. Data is streamed wirelessly over any compatible Wi-Fi network and can be viewed on any internet-enabled device, via browser or free mobile app.
Device setup and connection to a Wi-Fi network and the EasyLog Cloud are simple, just download the free EasyLog WiFi PC software or the free EasyLog Cloud mobile app and follow the device setup wizard. The device can be placed anywhere within range of the Wi-Fi network. If the device temporarily loses connectivity with the Wi-Fi network, it will log readings until it is able to communicate again with the EasyLog Cloud (max. 30 days at 10 second sample interval).
The device is IEEE 802.11bgn (2.4GHz) compliant, supports WEP, WPA/WPA2 encryption and enterprise networks (PEAP, TTLS, FAST).
The EL-WiFi-VACX has a protection rating of IP42, and the probe is rated to IP67. The device is freestanding, but can be attached to a wall or surface using the bracket provided, and clipped in and out of the bracket as required. This device is equipped with a translucent back to show a red flashing indicator when it is in an alarm state as well as a moderate volume sounder to alert anyone in close proximity.
Brand | Lascar |
---|---|
Condition | NEW |
Vendor Alias | EL-WIFI-VACX |
- 1 - Wi-Fi Connected High-Accuracy Data Logger
- 1 - Calibrated Thermistor Glycol Probe (EL-P-VACX)
- 1 - Wall Mounting Bracket (EL-WIFI WALL BRACKET)
- 1 - USB Type A to Micro B Cable (CABLE USB A-MICRO B)