Lascar Electronics Wireless Alert CM

Volt-Free Contact Monitor with Email Alerts

WIRELESSALERTCM
Wireless Alert CM

Lascar Electronics Wireless Alert CM

Volt-Free Contact Monitor with Email Alerts

WIRELESSALERTCM
Wireless Alert CM

The Lascar Electronics WA-PRO-TP Wireless Alert PRO TP Temperature Probe Limit Alert Sensor provides alert notification when high and low-temperature limits set between -40 and +125°C are breached.

  • Measurement Range: -40 to +125˚C (-40 to +257°F)
  • Measurement Resolution: 0.1˚C
  • Measurement Accuracy: ±0.5˚C (typical), ±1.5˚C (maximum)
  • Alert Levels: User-configurable, within measurement range stated above
  • Response Time: 1 minute
$37.49
  • Monitors whether a volt-free contact, such as a relay or volt-free switch, is open or closed
  • User-configurable alerts for contact open, closed or both
  • Sends email alerts when monitored contact is opened or closed
  • Offers alert delay settings to prevent unwanted warning
  • Customizable alert messages
  • Optionally sends scheduled status reports by email
  • Wi-Fi connected for easy wireless operation
  • Simple to set up using free mobile app
  • Battery life of up to 2 years (typical)
  • Includes sticky pad for mounting

Specifications

  • Device Operating Temperature: 0 to 129°F (-18 to 54°C)
  • Alert Notification States: Contacts Open and/or Closed
  • Alert Delay Range: 1 minute to 12 hours (user-selectable)
  • Dimensions: 2.7 x 1.3 x 0.9 in. (69 x 32 x 22 mm)
  • Cable length: 59 in. (1500 mm)
  • Environmental Conditions: Indoor use only - IP5X)
  • Wi-Fi: WPA/WPA-2 Personal - 802.11bgn (2.4GHz)

The Lascar Electronics Wireless Alert CM is a battery-powered device that can be connected to a volt-free contact and will send a warning email when it detects that the contact has opened or closed. Simply select your settings and connect to your Wi-Fi network using the FilesThruTheAir mobile app.

The Wireless Alert CM monitors whether a volt-free contact, such as a relay or volt-free switch, is open or closed. It then automatically sends notification emails to a user-selected email address. The device body can be secured in position using an adhesive pad (supplied) and is provided with a 1.5m cable with bare ends, ready to connect to your equipment or switch.

Users can also configure delays (between 1 minute and 12 hours), whereby the contact must remain opened or closed for a certain period of time before an alert is sent. In addition to this, the device can send a scheduled summary email detailing a number of alert events, percentage of contact open and closed time, and current battery level.

More Information
BrandLascar
ConditionNEW
Vendor AliasWIRELESS ALERT CM
  • 1 - Wireless Alert CM Contact Monitor
  • 1 - Sticky Pad for Mounting
  • 2 - 1.5V AAA Batteries