Leader Instruments HD TAB 9 PLUS
ATSC for USA Standard Signal Level Meter with Spectrum Analyzer
HDTAB9PLUS
HD TAB 9 PLUS
Leader Instruments HD TAB 9 PLUS
ATSC for USA Standard Signal Level Meter with Spectrum Analyzer
HDTAB9PLUS
HD TAB 9 PLUS
- Special Functions:
- ETR 101-290 T.S. Analyzer
- Exclusive patented ROVER AUTODISCOVERY system: Automatically detects and selects analog and digital COFDM/QAM TV signals in both measurement and spectrum mode
- Special Functions:
- ETR 101-290 T.S. Analyzer
- Exclusive patented ROVER AUTODISCOVERY system: Automatically detects and selects analog and digital COFDM/QAM TV signals in both measurement and spectrum mode
- HELP function: Automatically identifies all signals with digital modulation SAT, TV and CATV
- Automatic Assistant: Signal Quality analysis, Channel Scan memorization
- Barscan TV and CATV function from 10 to 100 channels on one screen
- Buzzer and Noise Margin real time graph for digital signals microinterruptions
- Reflectometric measurements APP
- PRODRIVE TEST: REMOTE MONITORING and LOGGING: TS, measurements, spectrum, thumbnails
- Optical Input signals
- SATELITE: SAT SCR, DiSEqC, SCR and dCSS, Motorized antenna, Dual LNB, SAT FINDER, SAT EXPERT
- Custom Channel Plans: 25 (199 ch. per plan), Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard
- Loggers: TV, SAT and combined with stop and go function
- SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite
- Free SMART PC interface program and FW upgrades
- Measurement and Spectrum Analysis Specifications:
- Frequency Range:
- TV, CATV and Radio: 4-1250 MHz
- SAT: 950-2610 MHz
- Frequency Resolution:
- TV and CATV 25 KHz
- SAT: 5 or 1 MHZ selectable
- Power range measurements: TV 28 to 130 dBμV, SAT 30 to 130 dBμV
- Digital Measurements: Digital Power, MER (32 to 42 dB depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER
- Analog Measurement and Picture: Analog level, V/A ratio
- Measurement Resolution: 0.1 dB
- Level Measurement Accuracy: 1 dB typ. (2 dB max.)
- Resolution Filter Bandwidth:
- TV and CATV: 100 KHz @ -3 dB
- SAT: 1 MHz or 5 MHz @ -3 dB selectable
- Constellation: For TV/CATV and SAT signals
- Spectrum: Real time, Max Hold and spectrum memorization with real time compare function
- Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position
- Echoes, Pre-echoes, Micro-echoes: Representation in real time
- Quality: Digital Auto quality
- Test: PASS-MARGINAL-FAIL
- TS: TR 101-290 v1.2.1 ANALYSIS, SI, PMT, bit rate, network delay, MPEG services and tables
- IPTV: measurements and picture decoding
- Frequency Range:
- Optical Measurements:
- FC-ST-SC interchangeable input connectors
- Automatic loss calculation
- Wavelengths (nm): 1310, 1490, 1550
- Range: -25 to 10 dBm
- Resolution: 0.1 dB
- Accuracy: +/- 0.5 dB
- Optical to RF conversion
- Communication Ports and Outputs:
- RF Input : 75 ohm (interchangeable "F")
- LAN: RJ45 10/100 base Ethernet
- USB 2.0: Type B (PC Interface)
- USB 2.0: Type A (USB drive)
- Digital Pictures: MPEG2-4 SD and HD pictures with Program List, Audio Video PIDs, LCN, Video bit Rate all on one screen
- Audio: AAC supplied, DOLBY (optional)
- Asynchronous Serial Interface (ASI): ASI input on 75Ω BNC connector, ASI output on 75Ω BNC connector
- Audio / Video: Composite A/V input, HDMI output
- Common Interface: PCMCIA slot for single/multi-service CAM modules
- General Specifications:
- 9 in. TFT TOUCH display: 16:9 high resolution and high brightness
- Power Supply: Built in LiPo battery with up to 6 hours duration and Battery Test function
- DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS
- PC Interface: USB
- Front-Panel: Alpha numeric keypad
- Power Save: TFT backlight timer, brightness adjust
- PC Management: SMART software
- Size: H 29 x W 17 x D 5.5 cm
- Housing: Aluminium and Steel and padded bag
| Brand | Leader |
|---|---|
| Condition | NEW |
| Vendor Alias | HD TAB 9 PLUS |
|
