• Remote Controller: The control module is designed to sit outside of the incubator. Settings can be easily viewed or changed from outside of the incubator without disturbing the incubator’s atmosphere. The thin ribbon cable is 5.5 feet long and easily passes underneath an incubator door via incubator’s utility port. Controller magnetically attaches to most incubator doors or can sit on a lab bench.
• Accu-Drive Shaking System: The exclusive patented Accu-Drive Shaking System delivers exceptional speed control, accuracy, and durability. The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100 rpm, the speed accuracy is ± 1% of set speed. When set under 100 rpm, speed accuracy is ± 1 rpm.
• Microprocessor Control: The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-point and will restart if power is interrupted.
• Triple Eccentric Drive: Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation.
• LED Display: Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off.
• RS232 Interface: Provides two-way communication for data logging and unit control.
• Speed Calibration Mode: Allows user to automatically recalibrate speed display.
• Applications: Cell cultures, solubility studies, and extraction procedures
• Construction: Cold rolled steel (CRS) and stainless steel, external control module, thin ribbon cable (5.5 feet or 1.7 m) easily passes underneath an incubator door or via incubators utility port
• Design Features: Built-in tray (11x13 inch or 28x33 cm) with a non-slip rubber mat (included)
• Communication: RS232 interface provides two-way communication for data logging and unit control (digital models)
• Operation: Detachable 3-wire cord and plug (included)

Safety Features:

• Overload Protection: Audible and visual signals will activate when system detects an obstruction.
• Speed Ramping Feature: Slowly increases speed to desired set-point to avoid splashing.
• Audible Alarm: In timed mode, alarm will sound when the time reaches zero. Alarm has optional mute function which can be set from the touch pad control.
• Spill-Resistant Design: Channels fluids away from internal components.