Onset U20-001-02-Ti
HOBO Titanium Saltwater Water Level Data Logger, 100 ft.
Onset U20-001-02-Ti
HOBO Titanium Saltwater Water Level Data Logger, 100 ft.
The Onset U2000102TI HOBO Titanium Saltwater Water Level Data Logger (100 ft.) records water level and temperature up to 100 feet depths with no cumbersome vent or desiccants to maintain. The titanium housing is suited for use within saltwater or brackish wetlands and tidal areas.
- Pressure/Water Level Range: 0 - 400 kPa (0 - 58 psia)
- Temp. Range: -4° - 122°F
- Lightning protection with no long signal wires/electronics shielded in metal housing
- NOTE: This product requires HOBOware software (USB interface cable included with BHW-PRO-CD purchase, ONLY)
- Lightning protection - no long signal wires, and electronics are shielded in titanium housing for use in saltwater
- HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure temperature, and water density
- Multiple-rate sampling allows faster sampling at critical times such as when pumping starts or stops
- Ideal for use in wells, streams, lakes, wetlands and tidal areas
- No-vent-tube design for easy reliable deployment
- Durable ceramic pressure sensor
- 3-point NIST-traceable calibration certificate included
- Operation Range: 0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range: 69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure: 500 kPa (72.5 psia) or 40.8 m (134 ft) depth
- Water Level Accuracy: Typical error: ±0.05% FS, 1.5 cm (0.05 ft) water
- Maximum error: ±0.1% FS, 3 cm (0.1 ft) water
- Raw Pressure Accuracy: ±0.3% FS, 1.20 kPa (0.17 psi) maximum error
- Resolution: <0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water
- Pressure Response Time (90%): <1 second; measurement accuracy also depends on temperature response time
- Temperature Measurements:
- Operation Range: -20° to 50°C (-4° to 122°F)
- Accuracy: ±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F)
- Resolution: 0.10°C at 25°C (0.18°F at 77°F)
- Response Time (90%): 5 minutes in water (typical)
- Stability (Drift): 0.1°C (0.18°F) per year
- Logger:
- Real-time Clock: ± 1 minute per month 0° to 50°C (32° to 122°F)
- Battery: 2/3 AA, 3.6 Volt lithium, factory-replaceable
- Battery Life (Typical Use): 5 years with 1 minute or greater logging interval
- Memory (Non-volatile): 64K bytes memory (approx. 21,700 pressure and temperature samples)
- Wetted Materials: Titanium, Viton o-rings, acetyl cap, ceramic sensor
- Logging Interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours
- Launch Modes: Immediate start and delayed start
- Offload Modes: Offload while logging; stop and offload
- Battery Indication: Battery voltage can be viewed in status screen and optionally logged in datafile; low battery indication in datafile
- Environmental Rating: IP68
- Environments: For use in outdoor and water environments
- Measurements: Absolute Pressure, Barometric Pressure, Temperature and Water Level
The Onset U20-001-02-Ti HOBO Titanium Saltwater Water Level Data Logger, 100 ft. is recommended for saltwater deployment for recording water levels and temperatures in wetlands and tidal areas. This data logger features high accuracy and ease-of-use, with no cumbersome vent tubes or desiccants to maintain.
Note: U20-001-02-Ti requires the HOBOware software (free to download) to operate, and either a U-DTW-1 Waterproof Shuttle or the Base-U-4 Optic USB Base Station for configuration and data offload. Please also note that a USB interface cable comes with the purchase of a HOBOware Pro CD (BHW-PRO-CD), only.
Country of Origin | United States |
---|---|
Brand | Onset |
Condition | NEW |
Vendor Alias | U20-001-02-TI |
- 1 - HOBO 100 ft. Titanium Saltwater Water Level Data Logger