Onset U-DTW-1
HOBO Waterproof Shuttle
UDTW1
U-DTW-1
The Onset UDTW1 HOBO Waterproof Shuttle can be used as a base station or with an underwater or outdoor HOBO data logger with an optic USB interface in order to provide convenient readouts and relaunching of the data logger.
- Compatible with all HOBO U-Series loggers with optic USB interface
- Not compatible with the HOBO U-Shuttle (UDT1)
- Waterproof up to 20m (66 ft.)
- HOBOware Pro is required for full use of product
- Compatible logger and matching coupler:
- For UA Pendant (Part # COUPLER2-A)
- For U20 Water Level (Part # COUPLER2-B)
- For U22 Water Temp Pro v2 (Part # COUPLER2-C)
- For UTBI TidbiT v2 (Part # COUPLER2-D)
- For U23 HOBO Pro v2 (Part # COUPLER2-E)
- Data capacity: 63 logger readouts of up to 64K each
- Operating temperature: 0° to 50°C (32° to 122°F)
- Storage temperature: -20° to 50°C (-4° to 122°F)
- Wetted materials: Polycarbonate case, EPDM o-rings and retaining loop
- Waterproof: to 20 m (66 feet)
- Time accuracy: ± 1 minute per month at 25°C (77°F)
- Logger-to-shuttle transfer speed: Reads out one full 64K logger in about 30 seconds
- Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 10 to 20 minutes, depending on computer
- Batteries: 2 AA alkaline batteries required for remote operation
- Battery life: One year or at least 50 complete memory fills, typical use
- Environments: For use in indoor, outdoor and water environments
The Onset U-DTW-1 HOBO Waterproof Shuttle provides convenient readout and relaunching of underwater and outdoor HOBO data loggers with an Optic USB interface, and is waterproof to 20m (66ft). The HOBO Waterproof Shuttle can also be used as a base station.
Country of Origin | United States |
---|---|
Brand | Onset |
Condition | NEW |
- 1 - HOBO Waterproof Shuttle
- 1 - USB Cable
- 1 - U20 Water Level Coupler (COUPLER2-B)
- 1 - U20L Water Level, U22 Water Temp Pro v2, U24 Conductivity, and U26 DO Coupler (COUPLER2-C)
- 1 - UTBI TidbiT v2 Coupler (COUPLER2-D)
- 1 - U23 HOBO® Pro v2 Coupler (COUPLER2-E)