Onset U20L-02
HOBO Water Level Data Logger, 100 ft.
The Onset U20L02 HOBO Water Level Data Logger (100 ft.) is suited for continuous monitoring of water level and temperature at depths of up to 100 feet in a wide range of underwater environments. The non-vented design allows for convenient deployment of the logger and the polypropylene housing allows for use within both freshwater and saltwater environments.
- Absolute Pressure/Water Level Operation Range: 0 - 400 kPa (0 - 58 psia)
- Temp. Range: -4° - 122°F
- NOTE: This product requires HOBOware software (USB interface cable included with BHW-PRO-CD purchase, ONLY)
- Self-contained non-vented design enables easy deployment
- Ideal for use in both fresh and saltwater environments, including wells, streams, lakes, wetlands, and tidal areas
- Depths up to 100 feet
- Durable ceramic pressure sensor withstands freezing
- HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure, temperature, and water density
- Pressure (Absolute) and Water Level Measurements
- Operation Range: 0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at
- 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range: 69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure: 500 kPa (72.5 psia) or 40.8 m (134 ft) depth
- Water Level Accuracy: Typical error: ±0.1% FS, 3.0 cm (0.1 ft) water
- Maximum error: ±0.2% FS, 6.0 cm (0.2 ft) water
- Raw Pressure Accuracy: ±0.3% FS, 1.20 kPa (0.17 psi) maximum error
- Resolution: <0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water
- Pressure Response Time (90%): <1 second at stable temperature; measurement accuracy also depends on temperature response time
- Temperature Measurements
- Operation Range: -20° to 50°C (-4° to 122°F)
- Accuracy: ±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F)
- Resolution: 0.10°C at 25°C (0.18°F at 77°F)
- Response Time (90%): 10 minutes in water (typical)
- Stability (Drift): 0.1°C (0.18°F) per year
- Logger
- Real-time Clock: ±1 minute per month 0° to 50°C (32° to 122°F)
- Battery: 2/3 AA, 3.6 Volt lithium, factory-replaceable
- Battery Life (Typical Use): 5 years with 1 minute or greater logging interval
- Memory (Non-volatile): 64K bytes memory (approx. 21,700 pressure and temperature samples)
- Wetted Materials: Polypropylene housing and lanyard; Viton and Buna-N O-rings; ceramic sensor in acetyl end cap; stainless steel screws suitable for saltwater
- Logging Interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours
- Launch Modes: Immediate start and delayed start
- Offload Modes: Offload while logging; stop and offload
- Battery Indication: Battery voltage can be viewed in status screen and optionally logged in datafile; low battery indication in datafile
- Environmental Rating: IP68
- Environments: For use in outdoor and water environments
- Measurements: Absolute Pressure, Barometric Pressure, Temperature and Water Level
The Onset U20L-02 HOBO Water Level Data Logger, 100 ft. is a research-grade water level data logger for continuously measuring water level and temperature in a wide range of underwater environments. It features 0.1% accuracy, a polypropylene housing for use in both fresh and salt water, and a non-vented design for convenient and hassle-free deployment.
This data logger requires either the U-DTW-1 Waterproof Shuttle or the Base-U-4 Base Station for configuration and data offload.
Note: U20L-02 requires the HOBOware software (free to download) to operate, and either a U-DTW-1 Waterproof Shuttle or the Base-U-4 Optic USB Base Station for configuration and data offload. Please also note that a USB interface cable comes with the purchase of a HOBOware Pro CD (BHW-PRO-CD), only.
Country of Origin | United States |
---|---|
Brand | Onset |
Condition | NEW |
Vendor Alias | U20L-02 |
- 1 - HOBO 100 ft. Freshwater/Saltwater Water Level Data Logger