Optical Wavelength Labs KIT-WT-WSMDVxx

Our Part No. KITWTWSMDVXX

Mfr. Model KIT-WT-WSMDVxx

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Optical Wavelength Labs KIT-WT-WSMDVxx

Our Part No. KITWTWSMDVXX

Mfr. Model KIT-WT-WSMDVxx

The Optical Wavelength Labs KIT-WT-WSMDVxx is a kit that contains the tools necessary for certifying fiber optic links against a myriad of popular cabling standards in multimode networks.

Certification of multimode fiber links at 850 nm and 1300 nm
Auto-test functions store references and data points automatically
USB interface for continuous data logging, report printing, or data downloading
OWL Reporter software

Datasheet

$1,085.00

This item ships FREE

Key Features

Certification of multimode fiber links at 850 nm and 1300 nm
Auto-test functions store references and data points automatically
USB interface for continuous data logging, report printing, or data downloading
OWL Reporter software for printing formatted fiber certification reports
Measurement modes include absolute (for optical power) or relative (for optical loss)
Data storage for up to 200 data points
Near-end visual fault location
Visual fiber identification
Selectively view, delete or resample data points
Supported Cabling Standards: EIA/TIA 568, ISO/IEC 11801, 10-Gig Ethernet, 1000Base-SX, 1000Base-LX, 100Base-FX, 10Base-FB, 10Base-FL, FDDI, ATM-155, ATM-622, Fiber Channel, Token Ring

WaveTester Optical Power Meter (WT-1)

Detector type: InGaAs
Calibrated wavelengths: 850, 1300, 1310, 1490, 1550
Measurement range: +5 to -60 dBm
Accuracy: ±0.20 dB
Display resolution: 0.01 dB
Battery life: Up to 1000 hours (Re-chargeable Lithium Polymer)
Connector type: 2.5mm/1.25mm universal
Measurement units: dBm, dB, mW, μW
Data storage: up to 200 readings
Display type: Backlit LCD
Auto-shutdown: Yes
Operating temperature: -10 to 55° C

WaveSource MM/VFL Light Source (WS-MDVxx)

Fiber type: Multimode
Launch method: LED
Center wavelength: 850 nm ± 30 nm; 1300 nm ± 50 nm
Spectral width: 850 nm: 50 nm; 1300 nm: 180 nm
Output power: -20 dBm
Initial accuracy: 0.1 dB
Battery life: Up to 120 hours (Re-chargeable Lithium Polymer)
Operating temperature: 0 to 55° C
VFL output wavelength: 650 nm
VFL output power: 1 mW
VFL operating modes: CW / Flash

Details

The Optical Wavelength Labs KIT-WT-WSMDVxx Fiber Certification Kit contains the tools necessary for certifying fiber optic links against a myriad of popular cabling standards in multimode networks.

The process of testing a network installation to ensure its adherence to specified standards is called certification, and often requires hard-copy documentation as proof of adherence to standards. Many fiber optic network bids and Requests For Quote (RFQ) are citing cabling standards to specify the set of guidelines (such as fiber length) that the network installer must follow during the network installation. Adherence to such standards is meant to ensure the quality of the installation and guarantee that the network will perform as it was designed.

The KIT-WT-WSMDVxx includes the WaveTester optical power meter, both multimode- and singlemode-ready, and can store reference values for all wavelengths used for optical loss measurements. Up to 200 fiber runs may be stored, and serially downloaded to a PC for report generation using our OWL Reporter software.

Finally, this kit contains the WaveSource 850/1300/VFL, featuring a multimode light source. Its dual wavelength outputs (850 nm and 1300 nm) are temperature-stabilized for accurate measurements. A Visual Fault Locator is also included for near-end visual fault location and visual fiber identification.

More Information