Optical Wavelength Labs KIT-WT-WSSDxx

Our Part No. KITWTWSSDXX

Mfr. Model KIT-WT-WSSDxx

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Optical Wavelength Labs KIT-WT-WSSDxx

Our Part No. KITWTWSSDXX

Mfr. Model KIT-WT-WSSDxx

The Optical Wavelength Labs KIT-WT-WSSDxx is a kit that contains the tools necessary for certifying fiber optic links against a myriad of popular cabling standards in singlemode networks.

Certification of multimode fiber links at 850 nm/1300 nm, and singlemode fiber links at 1310/1550 nm
Auto-test functions store references and data points automatically
Data storage for up to 200 data points
USB interface

Datasheet

$1,610.00

This item ships FREE

Key Features

Certification of singlemode fiber links at 1310 nm and 1550 nm
Auto-test functions store references and data points automatically
Data storage for up to 200 data points
USB interface for continuous data logging, report printing, or data downloading
OWL Reporter software for printing formatted fiber certification reports
Measurement modes include absolute (for optical power) or relative (for optical loss)
Selectively view, delete or resample data points
Supported Cabling Standards: EIA/TIA 568-B, ISO/IEC 11801, 10-Gig Enet, 1000Base-SX, 1000Base-LX, 100Base-FX, 10Base-FB, 10Base-FL, FDDI, ATM-155, ATM-622, Fibre Channel, Token Ring
Additional Power Meter Calibrated Wavelengths: 850 nm, 1300 nm, 1490 nm

WaveTester Optical Power Meter (WT-1)

Detector type: InGaAs
Calibrated wavelengths: 850, 1300, 1310, 1490, 1550
Measurement range: +5 to -60 dBm
Accuracy: ±0.20 dB
Display resolution: 0.01 dB
Battery life: Up to 1000 hours (Re-chargeable Lithium Polymer)
Connector type: 2.5mm/1.25mm universal
Measurement units: dBm, dB, mW, μW
Data storage: up to 200 readings
Display type: Backlit LCD
Auto-shutdown: Yes
Operating temperature: -10 to 55° C

Wavesource Singlemode Laser Source (WS-SDxx)

Fiber type: Singlemode
Launch method: FP Laser
Center wavelength: 1310 nm ± 20 nm; 1550 nm ± 30 nm
Spectral width: 1310 nm: 2 nm; 1550 nm: 2 nm
Output power: -10 dBm
Initial accuracy: 0.1 dB
Battery life: Up to 120 hours (Re-chargeable Lithium Polymer)
Operating temperature: 0 to 55° C

Details

The Optical Wavelength Labs KIT-WT-WSSDxx Fiber Certification Kit contains the tools necessary for certifying fiber optic links against a myriad of popular cabling standards in singlemode networks.

The process of testing a network installation to ensure its adherence to specified standards is called certification, and often requires hard-copy documentation as proof of adherence to standards. Many fiber optic network bids and Requests For Quote (RFQ) are citing cabling standards to specify the set of guidelines (such as fiber length) that the network installer must follow during the network installation. Adherence to such standards is meant to ensure the quality of the installation and guarantee that the network will perform as it was designed.

The KIT-WT-WSSDxx includes the WaveTester optical power meter, both multimode- and singlemode-ready, and can store reference values for all wavelengths used for optical loss measurements. Up to 200 fiber runs may be stored, and serially downloaded to a PC for report generation using our OWL Reporter software.

Finally, this kit contains the WaveSource 1310/1550 singlemode light source, featuring dual wavelength outputs (1310 nm and 1550 nm) that are temperature-stabilized for accurate measurements.

More Information