Practical Instrument 510B-Pt-1000-6
Single Type RTD Simulator for Pt 1000 Ohm (Hy-Cal HVAC)
Practical Instrument 510B-Pt-1000-6
Single Type RTD Simulator for Pt 1000 Ohm (Hy-Cal HVAC)
The PIECAL 510B-Pt-1000-6 Single Type RTD Simulator for Pt 1000 Ohm (Hy-Cal HVAC) simulates RTD resistances into all types of process instruments such as transmitters, recorders, controllers, alarms, and computer systems. Temperature can be directly dialed in which eliminates the need to read RTD to resistance tables.
- Pt 1000 Ohm (Hy-Cal HVAC)
- Alpha: 1.3750
- Selectable °C or °F
- Compatible with all process instruments
- Simulates one RTD type: Pt 1000 Ohm (Hy-Cal HVAC)
- Accurate to ±0.25°C (±0.5°F) with 0.1° resolution
- Sources RTD curve with direct temperature output
- Offers selectable °C or °F
- Compatible with devices using pulsed excitation currents, including PLCs, DCS, and multichannel recorders
- Suitable for a wide variety of transmitters
- Backlit display allows for easy operation in dark areas
- EZ-Dial Knob with two dialing speeds makes it easy to adjust output
- EZ-Check switch stores settings for 0% and 100% span adjustments
- Tough and rugged with a solid construction
- Comfortable to hold with small, lightweight design
- Powered by four AA alkaline batteries
- Superior battery life of 45 hours under typical continuous usage
- Offers easy access to battery compartment
- Protected to 60V
- Includes NIST Traceable Calibration Certificate
The PIE 510B-Pt-1000-6 Single Type RTD Simulator for Pt 1000 Ohm (Hy-Cal HVAC) simulates an RTD resistance into all types of process instruments including transmitters, recorders, controllers, alarms, data acquisition, and computer systems. No longer will you need to need to lug a decade box around or make errors reading RTD tables incorrectly. The PIE 510B is a superior replacement for decade boxes while eliminating errors caused by misreading RTD to resistance tables by allowing you to dial directly in temperature. The PIE 510B has better accuracy than many higher priced RTD calibrators.
Easy to Use
With the PIECAL 510B you can check and calibrate all your RTD instruments. The unit includes four detachable leads with spade lugs for easy connection to your RTD instruments.
Take it into the Shop, Plant or Field
Carry the 510B without worry, with its rugged, low profile design. It is easy to operate even in the dark areas of the plant with its backlit display.
Simulate One Dedicated RTD Type
The PIECAL 510B is designed for applications when you have only one type of RTD connected to your instruments.
Compatible with All Process Instruments
No competitor's calibrator is compatible with as many process instruments. Connect directly to the RTD inputs of smart transmitters, PLCs, DCS and multichannel recorders and verify their outputs or displays. The 510B works with older instruments and newer multichannel instruments that switch the excitation current between input channels.
Evolutionary Design
The PIECAL 510B improves upon other brands by including a backlit display with larger digits, rugged switches and a battery compartment for fast battery changes. Add an optional rubber boot with tilt stand (sold separately) for extra protection on the plant floor or in the field.
Brand | PIE |
---|---|
Catalog | 510B-PT-1000-6 |
Condition | NEW |
Vendor Alias | PIE 510B PT100-1.3902 |
- 1 - RTD Simulator
- 4 - AA Batteries
- 1 - Certificate of Calibration
- 1 - Evolution RTD Wire Kit (020-0208), including:
- 2 - Red Leads with Retractable Shield Banana Plugs & Spade Lugs
- 2 - Black Leads with Retractable Shield Banana Plugs & Spade Lugs