PROMAX DT-324B
IP Receiver to ASI-TS Output Converter with 4 TS-ASI Outputs
The PROMAX DT-324B IP Receiver to ASI-TS Output Converter with 4 TS-ASI Outputs extracts information from an Ethernet network and processes and delivers this to 4 TS-ASI outputs. The 100/1000 Mbps input must be connected to an IP network carrying MPEG-2 transport stream packets. This converter is controlled by the DT-800 control module (not included).
- IP Input: Ethernet 100/1000 Mbps, RJ45 connector
- TS Output: 4 x DVB-ASI, BNC Female Connector, 75 Ω
- IP input:
- Type: 1 Ethernet input 100/1000 Mbps
- Connector: RJ45
- TS output:
- Type: 4 x DVB-ASI
- Connector: BNC female, 75 Ohm
- IP streams:
- Communication protocol: UDP or RTP/UDP
- Transmission method: MULTICAST / IGMP Version 2
- Payload: 1 to 7 packets MPEG-2
- Configuration: Through DT-800 Control Module in local (keypad) or remote mode (PC) (See DT-800)
- Power supply: Via DT-800 Control and Power Module
- Connector: JST B08P-XL-HDS (connecting cable supplied with DT-800)
- Voltage and highest Consumption: +12 V <0.2 A; +5 V <1.7 A
The PROMAX DT324B IP Receiver to ASI-TS Output Converter with 4 TS-ASI Outputs extracts information from an Ethernet network and processes and delivers it up to 4 TS-ASI outputs. The 100/1000 Mbps input must be connected to an IP network carrying MPEG-2 transport stream packets. The IPTV module extracts the IP streams from four Transport Streams corresponding to four DVB-ASI outputs available. It is configured and controlled by means of the control module DT-800.
Brand | PROMAX |
---|---|
Condition | NEW |
Vendor Alias | DT-324B |
- 1 - BNC/BNC Cable 25 cm
- 1 - BNC/BNC Cable 50 cm
- 1 - User Manual