Ridgid HC300 115V
Hole Cutting Tool, 3 in. Cutting Capacity, 360 RPM, 115VAC Line Input
Ridgid HC300 115V
Hole Cutting Tool, 3 in. Cutting Capacity, 360 RPM, 115VAC Line Input
The RIDGID HC300 115V is a Hole Cutting Tool with 115VAC Line Input. The 1/2" capacity chuck accommodates holes sizes up to 3" diameter and standard hole saw arbors up to 7/16" Hex (1/2" chuck size). It has an integral motor, gear reduction, single-feed handle and ON/OFF switch. The compact design enables use in tight quarters.
- Spring-loaded chain saves time and aids operation
- Horizontal and vertical flats ensure perpendicular cutting
- Quick connecting two-piece design allows for easy mounting, transport, and set up
- Powerful 1.2 HP, 11 Amp motor delivers 360 RPM to quickly bore holes while optimizing hole saw life
- Spring-loaded chain saves time and significantly aids set up and operation
- Ergonomically designed with single-feed handle and ON/OFF switch for easy operation
- Compact size allows for use in tight quarters and difficult-to-reach locations
- Equipped with horizontal and vertical flats to ensure perpendicular cutting
- Multiple hole sizes allow fittings to be used for branching unpressurized pipelines
- Specifications:
- Hole Cutting Capacity: Up to 3 in. (76 mm)
- Pipe Diameter Mounting Range: 1 1/2 in. to 8 in. (38 mm to 200 mm)
- Chuck Size: 1/16 in. to 1/2 in. (1.6 mm to 13 mm)
- Motor: 115V, 1.2 HP; approved by CSA to CSA and UL standards
- Output Speed: 360 RPM (no load)
- Arbor Capacity: Up to 7/16 in.
The RIDGID HC300 115V (76777) Hole Cutting Tool, 3 in. Cutting Capacity, 360 RPM, 115VAC Line Input, is designed to cut holes up to 3 in. diameter into steel pipe. The multiple hole sizes allow the use of fittings such as Mechanical T, Vic-O-Let, Weld-O-Let, and others for branching unpressurized pipelines.
The HC300 offers great features that translate into unparalleled field and shop performance. The 1/2 in. capacity chuck accommodates all sizes of holes up to 3 in. diameter and standard hole saw arbors up to 7/16 in. Hex (1/2 in. chuck size). An integral motor and gear reduction optimizes the performance and saw life in the capacity range. A single-feed handle and ON/OFF switch allows for easy operation. The compact two-piece design allows the HC300 to be used in tight quarters and difficult-to-reach locations; it is also particularly useful when working off a ladder or overhead. With all controls at the operator's fingertips, the HC300 has been designed for maximum productivity.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Condition | NEW |
- 1 - HC300 Hole Cutting Tool
- 1 - Chuck Key