Ridgid K-50-9
Sectional Drain Cleaning Machine for 3/4 in. to 4 in. Drain Lines, with A-40 Cable Kit, 115V
Ridgid K-50-9
Sectional Drain Cleaning Machine for 3/4 in. to 4 in. Drain Lines, with A-40 Cable Kit, 115V
The RIDGID K-50-9 Sectional Drain Cleaning Machine (115V) with A-40 Cable Kit. Driven by a 1/6 HP motor, it has an integral Ground Fault Interrupter (GFCI) and toggle switch for FORWARD/OFF/REVERSE control. The 5/8" diameter sectional-type cable has a quick change coupling system. The clutch handle controls cable rotation.
- Designed for 3/4" to 4" drain lines, including sink, shower and floor drains
- Runs 3 cable sizes: 5/16" and 3/8" (not included) and 5/8"
- Designed for cleaning 3/4 in. to 4 in. drain lines, including sink, shower and floor drains
- Suitable for professional use with compact, powerful and versatile design
- Capable of running three different size cables: 5/16" (not included), 3/8" (not included) and 5/8"
- Uses sections of 5/8" cable to clean lines up to 100 ft (5/8" cable best for 1 1/4" to 3" drains)
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
- Pull handle down and cable spins at 400 RPM
- Release handle, cable stops instantly
- Equipped with 300-watt motor
- Approved by CSA to CSA and UL Standards
- Voltage: 115V
The RIDGID K-50-9 (52972) Sectional Drain Cleaning Machine for 3/4 in. to 4 in. Drain Lines, with A-40 Cable Kit (115V) is a portable drain cleaning machine designed to clean 1 1/4 in. to 4 in. drain lines. Applications include sink, shower and floor drains. The machine is capable of running three different size cables: 5/16", 3/8" and 5/8".
The K-50 machine is driven by a 1/6 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FORWARD/OFF/REVERSE control of the motor.
The K-50 is designed to use 5/8" diameter sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 400 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released.
The K-50 is also designed to use A-17 Adapters (not included). Adapters will hold 5/16" or 3/8" continuous length cables. Rotation of the adapters is controlled by the clutch handle. The cable adapter is equipped with a quick-acting brake which immediately stops rotation of the drum when the clutch handle is pulled upward.
Country of Origin | China |
---|---|
Brand | Ridgid |
Catalog | 52972 |
Condition | NEW |
UPC | 095691529725 |
Vendor Alias | 52972 |
- 1 - 115V Sectional Drain Cleaning Machine
- 1 - A-40 Cable Kit:
- 1 - Six Sections of C-9 Cable, 5/8 in. x 10 ft. (60 feet)
- 1 - A-10 Cable Carrier
- 1 - T-206 Funnel Auger
- 1 - T-215 4-Blade Cutter
- 1 - T-231 "C" Cutter
- 1 - A-13 Coupling Pin Key
- 1 - A-14-10 Rear Guide Hose
- 1 - A-1 Left-Hand Drain Cleaning Mitt