Ridgid RT3422
Tapping Tool for Pipes, 3/4 to 2 in. Capacity
The RIDGID RT3422 Tapping Tool performs pressurized taps using a saddle-mounted valve or welded nipple on steel, plastic, ductile iron and cast iron pipe. It is ideal for branching pressurized water, steam and natural gas mains. It taps water lines up to 500 psi, or steam, air and natural gas mains up to 150 psi. A self cleaning Acme threaded barrel permits easy feeding into pipe.
- Lightweight 21" design for tight spots
- Tapping Capacity: 3/4" to 2"
- Taps a variety of materials including steel, cast iron, ductile iron and plastic pipe
- Lightweight and compact 21" design is ideal for tight and restricted locations
- Heavy-duty and machined construction ensures dependable operation in high pressure taps
- Made with corrosion-resistant materials to provide lifetime operation with minimum maintenance
- Built-in bleed valve allows for easy purge of chips
- Independent cutter feed gives operator full control of drilling for maximum performance and saw life
- Versatile tool is capable of tapping mains of water up to 500 psig, or steam, air and natural gas lines up to 150 psig
- Coupon retaining bits ensure coupon will not be dropped in pipe, preventing contamination or damage of downstream equipment
- Note: Cutters and valve adapters sold separately
- Specifications:
- Tapping Capacity: 3/4 in. to 2 in.
- Mounting: Saddle, welded nipple, Weld-o-let, Thread-o-let
- Cutter Travel: 14 in. maximum
- Activation: Hand ratchet, air ratchet or right angle drill
- Type of Pipe: Steel, Plastic, Ductile Iron, Cast Iron
- Cutter Feed: Rotation of sleeve around Acme threaded barrel
- Pressure: Water, 500 psig at 100°F; Steam, air or natural gas, 150 psig at 370°F
The RIDGID RT3422 (75982) Tapping Tool is designed to perform pressurized taps using a saddle-mounted valve or welded nipple on steel, plastic, ductile iron and cast iron pipe. It is ideal for branching pressurized water, steam and natural gas mains.
The RT3422 is capable of tapping water lines under pressure up to 500 psi, or steam, air, and natural gas mains up to 150 psi. Weighing only 18 lbs, the RT3422 can produce 3/4" to 2" taps quickly and easily. The cutter is rotated by an 11/16" hand ratchet or can be operated by an air ratchet or right angle drill if desired. A self cleaning Acme threaded barrel permits easy feeding of the cutter into the pipe and resists the force of the pressurized pipe when the cut is made.
Country of Origin | Canada |
---|---|
Brand | Ridgid |
Condition | NEW |
- 1 - RT3422 Tapping Tool
- Note - Cutters and Adapters Sold Separately