TREND Networks SecuriTEST IP

SecuriTEST IP Digital, Analog and HD Coax CCTV Tester

R171000
SecuriTEST IP
R171000

TREND Networks SecuriTEST IP

SecuriTEST IP Digital, Analog and HD Coax CCTV Tester

R171000
SecuriTEST IP
R171000

The Trend Networks R171000 SecuriTEST IP Digital, Analog and HD Coax CCTV Tester is a single tester that can power, configure and document, increasing productivity from start to finish. Supply power to cameras via PoE/PoE+ or standard 12V DC power using the SecuriTEST IP internal Li-ion battery, eliminating the need for external power adapters.

  • Receive LED indicator
  • Encircled Flux compliance
  • Simplified bi-directional measurements
$788.50 Price $830.00
This item ships FREE
In stock: 1 Units
  • SecuriTEST IP digital/analog/HD coax CCTV tester
  • Accurate setup of 4k cameras: Digital zoom displays full detail of high resolution video on 7 in. touchscreen
  • Fast access to key features: Shortcut menu to instantly launch most used tools
  • One hand operation: Pan/Tilt/Zoom (PTZ) camera using either touchscreen or hard keys
  • Long battery life: Up to 10 hours continuous usage with lithium-ion battery
  • Ease of use: High resolution 7 in. capacitive touchscreen with 1920 x 1200 resolution display
  • Flashlight: Bright LED flashlight with 5/10/30/60 minute auto-off options
  • PoE+ troubleshooting: Display PoE+ consumption of attached camera in real-time using power monitor tool; displays voltage by pair and total wattage drawn
  • Analog/AHD/CVI/TVI video input: Connect to all common analog and HD-over-coax cameras for maximum versatility
  • Setup security monitors: Use analog Video Out port on tester with test pattern generator function to setup security monitors
  • 12V DC power supply: Power any camera using built-in 12V/2A DC power supply
  • Power up camera with PoE+: RJ-45 network port provides PoE+ (up to 24 watts) to camera using internal battery when network power is unavailable
  • Troubleshooting HDMI: Use HDMI In port, connect to any HDMI source to isolate Network Video Recorder (NVR) vs monitor problems
  • HDMI In: Eliminates need for separate monitors
  • RS485 interface: Control and program Pan/Tilt/Zoom (PTZ) cameras and monitor incoming PTZ control signals to assist in troubleshooting analog cameras
  • Camera audio testing using audio in port: Test microphone equipped cameras using tester's internal speaker
  • Camera audio testing using audio out port: Listen to camera audio through tester using external headphones/earbuds; useful in noisy environments
  • Data cable testing: RJ-45 port to perform wiremap testing of unshielded twisted pair (UTP) data cabling; automatically identify cross over cables and common wiremap faults using Tracer/Remote
  • USB charging: High power 2A USB port quickly charges devices such as mobile phones and tablets (NOTE: This port does not support data transfer)
  • microSD slot: Transfer test reports, screen captures and video clips, or update software using microSD card
  • HDMI output: Display tester screen on larger monitor using HDMI for greater clarity
  • TREND Networks, formerly known as IDEAL Networks

The TREND Networks (formerly IDEAL Networks) R171000 SecuriTEST IP Digital, Analog and HD Coax CCTV Tester is a single tester that can power, configure and document, increasing productivity from start to finish.

Supply power to cameras via PoE/PoE+ (Power over Ethernet) or standard 12V DC power using the SecuriTEST IP (R171000) internal Li-ion battery, eliminating the need for external power adapters and injectors.

The QuickIP™ feature allows installers who are new to IP camera systems to quickly and easily connect to cameras without being network experts.

Create professional test reports, including video screen shots to verify the job has been completed successfully and reduce unpaid call backs.

Camera Configuration, Installation and Troubleshooting

Connect camera to the tester using RJ-45, BNC or Wi-Fi.Click for larger image

Physically Connect Camera

Power the camera using: PoE+ (tester battery or network pass through), 12V DC power (tester battery).Click for larger image

Power Camera

Automatic network configuration and connection to IP cameras.Click for larger image

Camera Identification and Login

Comprehensive setup options including aim, focus, PTZ presets, network settings (IP), video settings.Click for larger image

Camera Setup

Create PDF installation reports with video images, statistics and camera settings.Click for larger image

Document

Send reports from the jobsite using email or preferred file sharing service.Click for larger image

Send Reports

Physically Connect CameraClick for larger image

Physically Connect Camera

Physically Connect Camera

Connect to any IP or analog camera using RJ-45, BNC connections or Wi-Fi via network.

Power Camera

Whether you are installing or troubleshooting cameras, SecuriTEST IP (R171000) supports all of the power requirements for IP and analog cameras.

No need for separate power injectors – SecuriTEST IP includes the following power outputs:

Power the camera using Power over Ethernet (PoE+), up to 24 watts from the tester - RJ-45 port.Click for larger image

Power Camera using PoE+

Power the camera by passing PoE+ from the network and through the tester - RJ-45 port.Click for larger image

Power Camera by Passing PoE+

Power the camera using 12V DC from the tester - 2.5mm to 3.5mm barrel connector.Click for larger image

Power Camera from Tester

SecuriTEST IP has a built-in DHCP server makingClick for larger image

Built-in DHP Server

Camera Identification and Login

QuickIP™ automates the process of connecting to IP cameras, allowing novice technicians to configure IP cameras as easily as analog cameras. For instance, where dynamic IP addresses are required by the camera, SecuriTEST IP (R171000) has a built-in DHCP server making setup easy and eliminating the need for additional network hardware.

A suite of networking troubleshooting tools are available to pinpoint and solve network connectivity issues.

  • Display Network Configuration
  • Ping / TraceRoute
  • Hub Blink for Port Identification
  • IP Network Scan - Check for IP Address Conflicts

IP Camera Setup

SecuriTEST IP (R171000) offers a comprehensive range of ONVIF and non-ONVIF camera setup tools to ensure the camera is installed correctly

1. Configure camera - update camera information and network settings.

2. Aim and focus - use the high-resolution touchscreen or the hard keys when wearing gloves.

3. Program presets for PTZ cameras - Program PTZ camera presets for users to automatically look at predefined areas.

4. Take snapshot - save video snapshots including preset locations for your installation reports.

5. Record video clip - record video clips to demonstrate complete coverage for PTZ cameras.

Analog and HD Camera Setup

Easily setup analog cameras.

Video adjustmentClick for larger image

Video Adjustment

PTZ protocol settingsClick for larger image

PTZ Protocol Settings

Test pattern generator to adjust screensClick for larger image

Test Pattern Generator

Professional Reports

Easily transfer reports from the jobsite - Using the built-in Wi-Fi and the web browser, test reports can be sent directly from the tester using email, your preferred file sharing service or be exported on microSD card.

Convert unpaid call backs to billable service calls - Generate professional PDF reports that provide proof of installation to the client.

No more spreadsheets - Today security engineers waste time manually filling in excel documents to create reports. SecuriTEST IP (R171000) captures camera images, network configurations, and automates documentation.

Reduce troubleshooting time - Reports capture as-built configurations that will help to reduce troubleshooting on future call backs.

18GB of combined storage - SecuriTEST IP (R171000) has 10GB of internal memory, and 8GB is available on the included SD memory card.

Data Cable Test (UTP) - Wiremap

RJ45 Cable TDR TestClick for larger image

RJ45 Cable TDR Test

Eliminate guess work troubleshooting cabling faults - SecuriTEST IP (R171000) is used in combination with the "Cable Tracer/Remote Tool" to pinpoint cabling faults such as cross overs, miswires, shorts and opens. The length of the cabling is also provided.

Determine water ingress in data cabling - Many cables are run outside or in underground conduit and exposed to moisture. Moisture ingress through the cable jacket, which is impossible to see, leads to a number of performance problems.

Cable Tracing - Search for Cabling

SecuriTEST IP (R171000) includes the ability to identify and trace cables using the digital tone generator and the "Cable Tracer/Remote Tool". Choose from four tones and use the "Cable Tracer/Remote Tool" with variable sensitivity settings to trace either large cable bundles from a distance or pinpoint a single cable within a bundle.

More Information
Country of OriginChina
BrandTREND Networks
CatalogR171000
ConditionNEW
UPC783250788477
Vendor AliasR171000
  • 1 - SecuriTEST IP Camera Tester
  • 1 - Carrying Case
  • 1 - Neck Strap
  • 1 - PSU EU/UK/US/AU Adapters
  • 1 - Cable Tracer/Remote
  • 1 - 3m Cat. 5e UTP Patch Cable
  • 1 - 3m Coax Cable with 2 End BNC (m) Connectors
  • 1 - 3m DC12V 3.5(f) to 2.5(f) Power Cable
  • 2 - RS485 Female Green Plugs
  • 1 - 0.5m RS485 Cable with Female Green Plug and 2 Clips
  • 1 - 0.5m Audio Male Jack with Other End 2 Clips
  • 1 - Quick Reference Guide
  • 1 - 8GB MicroSD Card and Reader with USB Adapter