UEi C161KIT
Residential Combustion Analyzer Kit with Direct CO2 Measurement, Printer and Case
UEi C161KIT
Residential Combustion Analyzer Kit with Direct CO2 Measurement, Printer and Case
The UEi C161KIT Residential Combustion Analyzer Kit equips HVAC/R professionals to install and maintain furnaces and boilers while reducing fuel costs. The C161 combustion analyzer has multiple sensor protections, altitude compensation, and a heat exchanger test.
- Combustion Analyzer Kit w/ Printer and Case
- Measures: CO, CO2, Flue and Ambient Temperature
- Calculates: O2, Efficiency (Net or Gross), Excess Air, CO/CO2 Ratio and Differential Temperature
- Combustion Analyzer Kit supplied with Printer and Case
- Measures: CO, CO2, Flue and Ambient Temperature
- Calculates: O2, Efficiency (Net or Gross), Excess Air, CO/CO2 Ratio and Differential Temperature
- Heat Exchanger Test
- 8 preprogrammed fuels
- 2 levels of sensor protection
- NOx Filtered
- Protective Water Trap
- High Altitude Compensation
- Large 6-Line Display
- IR printer port
- Low flow detection
- Auto-purge at shut down
- Protective rubber boot with magnet
- 30 memory positions
- Up to 10-Year warranty with annual recertification
- Eligible for UEi Service+
The UEi C161KIT Residential Combustion Analyzer equips HVAC/R professionals to install and maintain furnaces and boilers to optimize efficiency and reduce fuel costs.
Backed by UEi Service+ to give up to 10 years’ warranty, next day recertification, and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and now adds a heat exchanger test. Prints to included printer. Essential information for installing and maintaining furnaces and boilers all in one device. And comes in a hard carrying case.
The C161KIT has two levels of sensor protection; a NOx filtered CO sensor and Low Flow Detection. It also has sensor technology that reduces the cost of ownership, a Heat Exchanger test to check the exchanger integrity, and differential temperature. The C161 comes with high altitude compensation to maintain accurate readings at any altitude, auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane.
The C161KIT has a 6-Line display to view readings on one screen, which is a favorite among technicians. The Digital Multimeter Style dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to print to IR thermal printer, making it easy to document test results for later analysis.
Brand | UEi |
---|---|
Condition | NEW |
UPC | 053533509236 |
Vendor Alias | C161KIT |
- 1 - Flue Probe with Cone and Hose (CP2)
- 1 - Water Trap (SM50515)
- 1 - Particle Filter
- 1 - USB Cable
- 1 - Charger (AACA5)
- 1 - Quick Start Guide
- 3 - AA Rechargeable Batteries
- 1 - Carrying Case
- 1 - IR Printer
- 1 - Printer paper roll