The Wayne Kerr 7010 Transfer Standard Kit consists of conventional body transfer standards that must be used when extension leads or fixtures (other than the model 1J1011) are used with a 6500 Series instrument. They allow the open circuit, short circuit, and HF compensation routines to be performed.

The 7010 Kit should be used with fixtures that accept leaded components. Each component is terminated with two square pins and mounted on a PCB into a small box.

Box dimensions are 11 x 11 x 9 mm. The pitch between the square pins is 7.6 mm.

Open-circuit trim is performed with no DUT fitted.