AEMC 6550
Megohmmeter (Graphical, Analog Bargraph, Backlight, Alarm, Timer)
6550
6550
2130.31
AEMC 6550
Megohmmeter (Graphical, Analog Bargraph, Backlight, Alarm, Timer)
6550
6550
2130.31
The AEMC 6550 Megohmmeter, Graphical, Analog Bargraph, Backlight, Alarm, Timer is a high-end and portable device. It is intended for the measurement of a wide varity of electrical insulation resistance values on cables and devices operating at high voltage. The 6550 is a fully automated 10,000V graphical insulation tester that provides insulation measurements up to 30TΩ.
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- 5mA charging current
- Step voltage testing
- Ramp voltage testing
- Large backlit graphical LCD screen with digital display, bargraph and R(t)+v(t), i(t) and i(v) graphs
- Automatic calculation of DAR / PI / DD /ΔR (ppm/V) ratios
- Multiple test modes: voltage ramp and step with "burning", "early break" and "I-limit" modes
- Three filters to optimize measurement stability
- Calculation of R at referrence temperature
- Storage of 80,000 measurements
- Optically-isolated USB communication for transfer onto PC and report generation with DataView software
Applications
- Test insulation on cables, transformers, motors, generators, insulators and wiring installations
- High resistance or absorption tests
- Spot reading tests
- Timed resistance measurements
- Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
- Multi-layer insulation testing (DD)
- Test old or water damaged installations over long time periods
- Motor insulation resistance measurements
- Computer controlled production line testing
- Predictive maintenance by storing results on a PC for trend analysis with older tests
The AEMC 6550 10,000V Megohmmeter is a high-end portable Megohmmeter intended for the measurement of a wide varity of electrical insulation resistance values on cables and devices operating at high voltage. The AEMC 6550 Megohmmeter is the only fully automated 10,000V graphical insulation tester. Additionally, the AEMC 6550 Megohmmeter provides insulation measurements up to 30,000GΩ (30TΩ). Test results include DAR, PI, DD, ΔR, Capacitance, Leakage Current, as well as programmable temperature correction of resistance readings.
The AEMC 6550 is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView software provided. This megohmmeter can operate on battery or AC power while testing. The AEMC 6550 also offers the ability to program up to three step voltage profiles (from 40 to 10,000), each containing up to ten steps. Also, the AEMC 6550 has ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000 and 10,000V.
| Country of Origin | France |
|---|---|
| Brand | AEMC |
| Catalog | 2130.31 |
| Condition | NEW |
| UPC | 685338150247 |
| Vendor Alias | 2130.31 |
- 1 - Red 9-foot 15kV integral lead
- 1 - Blue 9ft 15kV integral lead
- 1 - Black 9ft 15kV integral lead
- 1 - Red Alligator Clip (100V CAT IV)
- 1 - Blue Alligator Clip (100V CAT IV)
- 1 - Black Alligator Clip (100V CAT IV)
- 1 - Blue Test Probe (100V CAT IV)
- 1 - Red Test Probe (100V CAT IV)
- 1 - Optical USB cable
- 1 - US 115V Power Cord
- 1 - Small Classic Tool Bag
- 1 - User Manual
