Desco 19331
Full Time Monitor, With UK Power Cord
The Desco 19331 Full-Time Continuous Monitor is a single workstation continuous monitor. It continuously monitors the wiring of an AC outlet, path-to-ground integrity of one operator, and the ground plane of one ESD worksurface.
- Single Workstation Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface, and the electrical ground used to by the monitor
- Single Workstation Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface, and the electrical ground used to by the monitor
- Monitored Ground Terminal Provides a verified ground point for mats, carts, tools, and other items
- Light Tower Jack Connects with 19332 Light Tower Accessory (Not included)
- Auxiliary Jack Connects with 19333 Power Relay Accessory (Not included)
- Wave Distortion Technology
- AC Outlet Monitor Circuit Verifies the wiring of an AC outlet and continuously monitors its path-to-ground integrity
- Park Delay Timer and Park Snap Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
- Embedded Relay Terminal Activates when a failure is reported by the monitor
- Mat Monitor Switch Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
- Audible Alarm Adjustment
- Enclosure with Mounting Tabs
- Single-Wire Impedance Design Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
- 1.2 Volt Operator Test Voltage Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
- <50 Millisecond Alarm Response Time
- Continuous Visual and Audible Alarms
- Calibration Verification
- NIST Calibrated
- 100-240VAC Input with UK Power Cord
The Desco 19331 Full-Time Continuous Monitor is a single workstation continuous monitor. It continuously monitors the wiring of an AC outlet, path-to-ground integrity of one operator, and the ground plane of one ESD worksurface. Mounting tabs make it suitable to install in workbench or equipment settings. The embedded relay terminal activates when a pass condition is displayed on the monitor and can be connected to machines for access control or other devices. Connect the 19332 Light Tower accessory for increased alarm visibility. Connect the 19333 Power Relay accessory to control power to workbenches, hand tools, and other electronic devices dependent on the Full-Time Continuous Monitor's status.
The 19331 Full-Time Continuous Monitor is designed with Wave Distortion Technology to provide stable continuous monitoring of the path-to-ground and presence of 1 megohm resistance of an operator's wrist strap. Audio and visual alarms activate (in less than 500 milliseconds) when the operator unintentionally disconnects from the monitor or the wrist strap connection points are intermittent. The 19331 also monitors for a worksurface path-to-ground of less than 10 megohms and the integrity of the electrical ground used to by the monitor. All Full-Time Continuous Monitors are calibrated to NIST standards.
Brand | Desco |
---|---|
Condition | NEW |
- 1 - Full-Time Continuous Monitor (19331)
- 1 - Mat Monitor Cord (White)
- 1 - Countersunk Washer
- 1 - Flat Head Screw, 6-32 x 1/4"
- 2 - Pan-Head Screws, #6 x 3/8"
- 1 - Dual Lock Fastener Set, 2" Length
- 1 - 10mm Interchangeable Park Snap
- 1 - 10mm Operator Jack Adapter
- 1 - Power Cord with UK Plug