Fluke 1674FC US/1630/FTT
Multifunction Installation Tester with Fluke TruTest Software and 1630-2 FC Earth Ground Clamp, Fluke Connect Compatible
Fluke 1674FC US/1630/FTT
Multifunction Installation Tester with Fluke TruTest Software and 1630-2 FC Earth Ground Clamp, Fluke Connect Compatible
The Fluke 1674FC US/1630/FTT combines the 1674FC US Multifunction Installation Tester with the Fluke TruTest Software and Fluke 1630-2 FC Earth Ground Clamp. The integrated data management capabilities and comprehensive reporting software allows for an integrated installation testing solution.
- Fluke Connect wireless compatibility
- Fluke TruTest Software simplifies data management/reporting
- Fluke 1630-2 FC Earth Ground Clamp for earth ground loop resistance
- Bundle combines 1674FC US Multifunction Installation Tester with Fluke TruTest Software, Fluke 1630-2 FC Earth Ground Clamp
- Ideal for fixed wire installation testing, insulation resistance testing, GFCI testing, installation certificates
- Tests voltage/frequency, checks wiring polarity to detect broken N wires, measures insulation resistance/loop/line resistance
- Quickly generates inspection certificates onsite, with few simple steps, allowing user to finalize/invoice inspection at time of service
- Auto Test function allows user to run entire automatic installation test sequence with single button press
- Insulation PreTest function helps eliminate accidental damage to peripheral equipment, saves time/money
- Future-proof business with advanced Surge Protection/Insulation Monitoring Device (SPD/IMD) testing features
- Easily integrate earth resistance clamp measurement
- RCD trip current/trip time measurement in parallel (RCD type AC, A, B, F, GFCI)
- PEFC/PSC, loop impedance measurement in parallel, displays them together on dual display
- Continuity test with low test current (10 mA) to measure motor windings
- Additional high current loop mode for faster measurements than loop tests with non-trip mode for RCD protected circuits
- Z Max memory for loop tests to support easy evaluation of highest loop test value
- Ring testing lets user select required input sockets without exchanging test leads
- Simultaneous readings of voltage measurements between L-N, L-PE, N-PE using mains cord, no need to change measurement connections
- Earth Volt Touchpad detects raised earth voltages over 50V, indicating potentially dangerous situations
- Visual/audible voltage warning when voltage exceeds 50V
- Voltage drop measurement function for added safety
- Color-coded input terminals rated CAT III 600V/CAT IV 300V
- Fluke Connect button transfers data to user's smart device
- Toggle between measure mode/form mode
- SAVE button for future analysis of measurements
- Reduces manual data entry/record keeping via wireless connectivity to compatible Fluke Connect tools, link test results directly to circuit/point under test
- Fast setup of tester via integrated color touchscreen/user's PC
- Field updatable for applying changes to regulations/enhancements in the field
- Full-color touchscreen/tactile rotary knob for fast navigation, no complex multi-level menus
- Color touchscreen display operable with/without safety gloves
- Navigate through display with rotary dial, tap finger on display screen to make selection
- Unique zero adapter for fast, reliable, accurate test lead/mains cord compensation
- Rechargeable 2,500 mAh Li-ion battery covers full day of testing
- Standard USB-C charging port with fast charging support for convenient on-the-go charging, data transfer, firmware updates
- Compact/lightweight with padded neck strap to free user's hands
- Professional hard case for transporting/protecting installation testers/accessories
Electrical
- AC Voltage Range: 600V
- DC Voltage Range: 600V
- Voltage Frequency Range: 45 to 66 Hz
- Loop and Line Impedance (ZI) Range: 10Ω, 20Ω, 200Ω, 2000Ω
- Insulation Resistance (RISO) Range: 50V, 100V, 250V, 500V, 1000V
- Continuity Testing (RLO) Range: 20Ω, 200Ω, 2000Ω
- Earth Resistance Test (RE) Range: 200Ω, 2000Ω
General
- Size: 10.3 in. x 5.6 in. x 4.7 in.
- Ingress Protection: IEC 60529, IP40
- Safety: Complies with IEC/EN 61010-1, IEC 61010-2-030, IEC 61010-2-034
- Safety Rating: CAT III 600V, CAT IV 300V
- Performance: IEC 61557-1 to IEC/EN 61557-8, IEC 61557-10
A Single Solution to Installation Testing Needs - Simplified Setup, Faster Testing, Easier Reporting
The Fluke 1674FC US/1630/FTT Multifunction Installation Tester will revolutionize the way users work. With an ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity, and comprehensive reporting software, the 1674FC US/1630/FTT sets the new standard for an integrated installation testing solution.
Reliable installation testing is essential for ensuring the safety, optimal functionality, and integrity of a facility's electrical systems. The 1674FC US/1630/FTT's rugged design allows users to verify the safety of electrical installations in domestic, commercial, and industrial applications while meeting the requirements of IEC/HD 60364-6 and all relevant local installation test standards.
With the 1674FC US/1630/FTT, users will be able to perform required testing faster and reduce the time spent on documentation, all while having the ultimate confidence in the data being collected.
The standalone Fluke 1674FC US Multifunction Installation Tester offers users both the Auto Test and Insulation PreTest functions along with compatibility with the Fluke Connect app and family of instruments. The Fluke 1674FC US/1630/FTT bundle includes the Fluke TruTest Software and Fluke 1630-2 FC Earth Ground Clamp.
Simplified User Interface and Testing Setup
The 1674FC US/1630/FTT takes data management to the next level streamlining test set up and preparation with an advanced bidirectional user interface. When setting up a project, the hierarchical tree topology for clients, sites, distribution boards, circuits, and test points can be easily customized using the high-resolution color touchscreen, a smart device, or by a PC. Edit, add, delete, or modify information directly on the tool as testing is being performed to ensure accurate data, or transfer updates to the tester via the Fluke Connect mobile app or TruTest desktop software. The easy-to-read test tables help users quickly see that they are capturing the right measurement data at the right test point, every time. Now users can spend less time setting up their tester and organizing data, giving them more time to perform valuable testing.
Perform All Required Tests up to 30% Faster
Installation testing can be a time-consuming process. This testing often requires repetitive, manual test setups that can be frustrating and introduce the opportunity for errors.
The Fluke 1674FC US/1630/FTT leverages a unique Auto Test function that enables users to run through an entire installation test sequence at the touch of a button. An integrated help function provides a visual connection guide to help ensure measurement success. Automatic measurement validation, with user-defined limit warnings, compares test results to the relevant standards and provides users with an immediate visual PASS/FAIL indication to quickly identify potential issues. Eliminating manual testing and automating measurement validation means users can perform their tests up to 30% faster, giving them more time to focus on other critical tasks and increasing their productivity.
Reduce Documentation and Reporting Time up to 50%
The Fluke 1674FC US/1630/FTT helps users reduce documentation time by up to 50%. Link test results to the circuit or point under test, reducing manual data entry and recordkeeping. Users can also preview inspection results in the field via the tester, a smart device, or PC, and Fluke Connect compatibility, making it easy to store, manage, and share data from the field. Fluke TruTest Software lets users generate inspection certificates on site with just a few simple steps, so users can finalize and invoice inspections performed at the time of service. The Fluke Connect mobile app enables users to document and input all relevant photos and inspection notes, so they can complete their work on site, eliminating extra work at the office.
Insulation PreTest Functionality
The Fluke 1674FC US/1630/FTT includes an Insulated PreTest function so that users can better protect the installation and avoid costly mistakes. If the tester detects that appliances are connected to the system during the test, it will stop the insulation test and provide a visual and audible warning. This function helps eliminate accidental damage to peripheral equipment and saves both time and money.
Optimized Software and Reporting
The Fluke TruTest Software simplifies electrical system data management and reporting. With a single, integrated Fluke solution, users can eliminate the hassle of traditional data management. Proper data management and testing information is critical for producing easy-to-understand reports for clients or a management team. The TruTest Software streamlines the process by allowing users to create and transfer testing metadata between the software and installation tester via a USB-C interface cable, or via the Fluke Connect mobile app, which helps ensure accurate results.
The user-friendly interface, intuitive workflow, and report builder allows users to quickly format their measurement data into printable test certificates and reports that are complete with their company logo and electronic signature. The live onscreen dashboard allows users to see the status of all their clients instantly along with navigating to further levels of detail if desired.
The Fluke TruTest Software allows users to create certificates that are compliant with a growing list of regional reports, including BS7671, DIN VDE 0100-600, ÖVE/ÖNORM E 8101, NIN/NIV, NEN3140, and other European installation test standards. All these reports are available at the touch of a button, and a pre-configured international template ensures that no matter the location, TruTest Software has the user covered.
Fluke Connect Compatibility
Enhance the functionality of the 1674FC US/1630/FTT with the Fluke Connect mobile app. This app works to eliminate tedious data entry along with optimizing data management with cloud storage. The Fluke Connect mobile app wirelessly synchronizes measurement data from the installation tester for later export to the TruTest desktop software for prompt and effective reporting even on location. Use the Fluke Connect app to create projects and upload them to the 1674FC US/1630/FTT for streamlined data management. Construct distribution boards and circuits to send to the tester in order to use this data to guide the testing regime. With the Fluke Connect app, users can also take photos with their smart device and assign them, along with notes, to specific test points or assets for the creation of detailed visual inspection reports.
With the powerful Fluke Connect ecosystem of test tools, users will be able to take their troubleshooting and reporting to the next level. Connect additional test tools, like the Fluke 369 FC Leakage Current Clamp (not included) or the Fluke 1630-2 FC Earth Ground Clamp, to synchronize data between auxiliary devices or test points and provide clients with a clearer picture of overall facility health.
Brand | Fluke |
---|---|
Condition | NEW |
- 1 - Multifunction Installation Tester (1674FC US)
- 1 - Fluke TruTest Software License
- 1 - Earth Ground Clamp (1630-2 FC)
- 1 - Set of Standard Test Leads
- 1 - Set of Alligator Clips
- 1 - Remote Control Probe
- 1 - Mains Cord with Single Input Connector
- 1 - USB-C Charging Power Adapter
- 1 - Zero Adapter
- 1 - Padded Carrying/Hanging Strap
- 1 - Hard Carrying Case
- 1 - Li-ion Battery Pack