Fluke Networks LIQ-DUO-KIT-1475

Our Part No. LIQDUOKIT1475

Mfr. Model LIQ-DUO-KIT-1475

Catalog No. 6022804

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Fluke Networks LIQ-DUO-KIT-1475

Our Part No. LIQDUOKIT1475

Mfr. Model LIQ-DUO-KIT-1475

Catalog No. 6022804

Length measurement shows distance to termination, open, or short
Wi-Fi analysis to Wi-Fi 6E, including networks, channels, and access points
Wire map shows type and location of fault

This product is available for shipping to the US, Canada, and Puerto Rico only.

$11,824.99

This item ships FREE

Request a Quote

Key Features

Cable performance testing up to 10GBASE-T plus troubleshooting (distance to fault, wire map, toning)
Network features include IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port/VLAN number, and advertised data rates)
Ethernet Alliance-certified PoE Verification detects PoE class (1-8) and power, and performs load test of available PoE from connected switch
Wi-Fi analysis to Wi-Fi 6E, including networks, channels, and access points
Save up to 1000 test results and manage and print reports from LinkWare PC
RJ45 Port for connection to cable or switch port
Internal antenna for Wi-Fi radio supporting 2.4 GHz, 5 GHz, and 6 GHz bands
PASS/FAIL frequency-based measurement results
Touchscreen color display provides clear, easy-to-use controls
Length measurement shows distance to termination, open, or short
Wire map shows type and location of fault (miswires, split pairs, shorts, breaks)
USB-C port for data export, software updates and charging

SimpliFiber Pro Optical Power Meter Features

Measure loss and power levels, locate faults and polarity issues, and inspect connector end-faces
Reduces multiple steps and uses simultaneous dual-wavelength testing feature to measure range of power levels in just half the time
Allows for non-touch solution to check for live fiber without having to plug into ports
Enables network technicians to do time-consuming procedures that normally require team
Durable and rugged, featuring impact-resistant covers and compact, ergonomic shape for comfortable and secure grip

VisiFault Visual Fault Locator Key Features

Locates visual faults including tight bends, breaks and bad connectors
Accelerates end-to-end fiber checks
Easily verifies polarity and identifies fibers
Features continuous and flashing modes
Ergonomic case survives drops, impacts and vibrations
Supports 2.5 mm and 1.25 mm SFF connectors
Over 80 hours of battery life with two AA batteries

General Specifications

Languages Supported in UI: English, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portuguese, Czech, Danish, Dutch, Finnish, Norwegian, Polish, Swedish, and Turkish
Weight: 1 lbs 6 oz (624g)
Battery:
- Type: Lithium-ion, 3.6 V, 6400 mAh
- Life: 8 hours typical
- Charge time: 4.5 hours
- Charging temperature range: 0 °C to 40 °C
Power Adapter
- Input: 100 to 240 V ac ±10 %, 50/60 Hz
- Output: 15 V dc, 2 A maximum
- Class II
Host Interface: USB type C
Display: 800 x 480 pixels color capacitive multi-touch
Dimensions: 22 cm x 11 cm (8.5 in x 4.5 in)
Operating Temperature: 0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature: -10 °C to 60 °C (-14 °F to 140 °F)
Operating Relative Humidity:
- 0 % to 90 %, 0°C to 35°C
- 0 % to 70 %, 35°C to 45°C
Operating Altitude: 4,000 m; 3,200 m with ac adapter
Vibration: Random, 2 g, 5 Hz-500 Hz
Drop: 1 m drop, 6 sides

Active Network Diagnostics

Diagnostic Protocols: Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP) Internet Control Messaging Protocol (ICMP), Dynamic Host Configuration Protocol (DHCP)
IP Address Setup: LinkIQ address, DNS Server, Gateway for IPv4 or v6 either manually or via DHCP
IP Ping Test Results: Four response time results for target, DNS Server(s), Gateway, plus average and number lost
Nearest Device Diagnostics: Switch Name / IP + MAC Address, Port Number, VLAN Name, Advertised Data Rates, Advertised Duplex
Power Over Ethernet Compatibility: Ethernet Alliance Certified to IEEE 802.3af/at/bt, Hardware negotiation with signature resistance, Software negotiation with LLDP/CDP
Power Over Ethernet Diagnostics: Advertised Power Class (0-8), Advertised Available Power, Powered Pairs, Diagnostics for both Single and Dual signatures
Power Over Ethernet Measurements: Loaded Voltage (V), Loaded Power (W)
Port Blink: Blink light of connected port

Cable Test Specifications

Test Port: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs
Commissioning Autotests: 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only; Test Speed: 6 seconds for lengths < 70 m
Cable Types: Balanced twisted-pair cabling; Unshielded twisted-pair; Screened twisted-pair; 2-pair and/or 4-pair
Wire Map-Only Tests: Document wire map, Length of each pair, Diagnose split pairs, User selectable T568A or T568B, User selectable crossover settings (Straight through, Half-crossover, Full-crossover); Test speed: 1 second for lengths < 120 m
Length (Maximum): 305 m (1000 ft)
Nominal Velocity of Propagation (NVP): User settable
Tone Generator: Generates digital tones compatible with Fluke Networks IntelliTone probe; Generates analog tones compatible with general analog probes
Remote ID Locators: Use remote ID terminations to identify up to 7 unique ports or office outlets

Wi-Fi Test Specifications

Supported Wireless Standards: 802.11b, 802.11a, 802.11g, 802.11n (Wi-Fi 4), 802.11ac (Wi-Fi 5), and 802.11ax (Wi-Fi 6/6E). Additionally, tester will report presence of future standards, such as 802.11be, if standard's presence can be decoded in supported beacon
Frequencies Supported: Frequencies of channels received and transmitted (where allowed by country regulations): 2.4 GHz band: 2.402 to 2.482 GHz (channel 1 to channel 13); 5 GHz band: 5.170 to 5.330 GHz, 5.490 to 5.730 GHz , 5.735 to 5.835 GHz (channel 36 to channel 165); 6 GHz band: 5.945 to 7.125 GHz (channel 1 to channel 233). NOTE: Tester transmits only on frequencies allowed in country where it is sold
Country Certifications: AE, AU, AR, BR, CA, CL, CN, IN, JP, KR, KW, MY, MX, NZ, PH, SG, TH, TW, UK, US, ZA, plus European Union
Network Tests: Number and name (BSSID) of available access points, signal strength, security type, IEEE 802.11 standard supported
Access Point Tests: Networks supported / country code, BSSID, signal strength, band/channel/bandwidth, IEEE 802.11 standards supported, security types, TX/RX rates
Channel Tests: Utilization, Number / signal strength of access points, overlap

Details

The Fluke Networks LIQ-DUO-KIT-1475 LinkIQ Duo Cable/Wi-Fi/Network Tester Kit comes with the SimpliFiber Pro Optical Power and Fiber Kit. This testing solution verifies cable performance up to 10 Gb/s and solve network connectivity problems. The LinkIQ tester validates cable performance using frequency-based measurements and a wire map of the cable under test. It also performs ping tests to verify connectivity and nearest switch diagnostics to identify key network issues and validate switch configuration—eliminating the need for another device. The LinkIQ Duo model adds Wi-Fi analysis to Wi-Fi 6E (where approved), including networks, channels, and access points plus warning of common configuration issues.

Cable Testing Users Trust

The LinkIQ tester is capable of measuring lengths up to 305 meters (1000 feet) and provides distance to faults such as opens, shorts, and unterminated cable. Using the remote ID allows for a complete wire map of the cable pairs which helps identify miswired and split pairs. The primary cable testing feature of LinkIQ tester is the cable performance test which qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s). It performs these tests via frequency-based measurements. Using IEEE-standards-based measurements ensures that tested links meet performance requirements as opposed to transmission testers which only prove that the specific test devices can communicate over the link. Operators may set performance requirements from 10 Mb/s to 10 Gb/s for a simple pass/fail indication.

Network Testing Users Need

Along with the robust cable testing features, the LinkIQ tester also provides detailed information on the nearest connected switch and connectivity testing with IP ping. The LinkIQ tester negotiates with the switch to identify the advertised data rate (up to 10GBASE-T), half/full duplex identification, the switch name and IP address, port number, and VLAN info. The ping test verifies connectivity to devices on the local network or the internet and supports both IPv4 and v6. The address of the LinkIQ tester may be set up manually or through DHCP. Once set, the ping test runs as part of the Autotest when a switch is detected. Results of the ping test include identification and response time of each of four pings to the target, the DNS server, and gateway.

In-Depth PoE Testing

While Power over Ethernet makes installation of devices such as security cameras and access points simpler, a survey by the Ethernet Alliance of over 800 installers, integrators, and end users found that four of five respondents experienced difficulties in integrating PoE systems. Part of this can be traced to the fact that the IEEE offers three PoE standards, the term PoE is not registered, and there are a variety of non-standards-compliant implementations.

To simplify PoE installation and troubleshooting, the LinkIQ tester shows the pairs where power is provided, including the different power levels and pairs for dual-signature implementations. Further, the LinkIQ tester will actually place a load on the connection to ensure that the advertised power is actually being delivered by the switch across the cabling infrastructure. The LinkIQ tester has been certified by the Ethernet Alliance to IEEE-802.3 standards for reliable multivendor interoperability.

LinkWare PC Documentation

The LinkIQ tester provides complete documentation abilities for the tests it performs. Up to 1,000 results can be given descriptive names and stored and recalled in the tester. Test names and numbers automatically increment as each is saved: Annex B-1, Annex B-2, Annex B-3, etc. which saves time when testing cables in sequence. Report data may be exported to a PC for documentation purposes. The LinkIQ tester uses LinkWare PC, Fluke Networks’ reporting software which supports a variety of testers going back 20 years and is the industry’s leading reporting solution with tens of thousands of active users. LinkWare PC can be used to store the results as well as generate PDF reports.

More Information