Hioki CM4371-92
True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter and P2000 High Voltage Probe
Hioki CM4371-92
True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter and P2000 High Voltage Probe
The Hioki CM4371-92 True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC, with Z3210 Wireless Adapter and P2000 Probe, offers durability with its strong jaws, and IP54-rated enclosure. Ideal for safe inspection of photovoltaic power generation facilities with high voltages, it supports wireless data transfer via Bluetooth for easy reporting.
- DC Current: 20 A/600 A; Accuracy: ±1.3% rdg. ±0.08 A
- AC Current: 20 A/600 A; Accuracy, 45 to 66 Hz: ±1.3% rdg. ±0.08 A
- DC Current range: 20 A/600 A; Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
- AC Current range: 20 A/600 A (10 Hz to 1 kHz, True RMS); Basic accuracy, 45 to 66 Hz: ±1.3% rdg. ±0.08 A (at 20 A)
- Crest factor: 20 A range - 7.5; 600 A range - 3 or less
- DC+AC Current range: 20 A/600 A (10 Hz to 1 kHz, True RMS); Basic accuracy DC, 45 to 66 Hz: ±1.3% rdg. ±0.13 A (at 20 A)
- DC Voltage range: 600 mV to 1000 V (when using P2000: 600 V to 2000 V)
- AC Voltage range: 6 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS); Basic accuracy, 45 to 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- DC+AC Voltage range: 6 V to 1000 V; 4 ranges; Basic accuracy DC, 45 to 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
- Resistance range: 600 Ω to 6.000 MΩ; 5 ranges; Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
- Capacitance range: 1 μF to 1000 μF; 4 ranges; Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
- Frequency range: 9.999 Hz to 999.9 Hz; 3 ranges; Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
- Temperature (K): -40 to 400 ˚C
- Voltage detection: Hi - 40 V to 600 V AC; Lo - 80 V to 600 V AC, 50/60 Hz
- Dustproof, waterproof: IP20 (Voltage measurement in completely dry conditions when jaw closes); IP54 (while in storage)
- Core jaw diameter: φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W x 14 mm (0.55 in) D
The Hioki CM4371-92 True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter and P2000 Probe features strong jaws, a broad -25°C to 65°C operating temperature range, and an IP54 dustproof and waterproof enclosure. This meter enables professionals to work quickly in tough situations, including the development, repair, and maintenance of equipment and devices.
The Hioki P2000 enables high voltage measurement up to CAT III 2000 V by simply connecting to the CM4371 clamp meter.
Wireless Support
When the Wireless Adapter Z3210 is installed, Bluetooth wireless communication is enabled. It transfers measurements to smart devices, such as smartphones or tablets, and allows users to quickly create reports with field photos and drawings.
NOTE: This instrument can be used to measure voltages in excess of 1000 V DC if (and only if) both of the following conditions are satisfied:
- 1. The circuit under measurement is isolated from the commercial power grid.
- 2. The circuit under measurement is isolated from ground.
NOTE: Do NOT use this instrument with circuits with a terminal-to-ground voltage exceeding 1000V. Doing so may result in electric shock.
NOTE: In the 1500V range, this instrument can withstand inputs of up to 1000V continuously, or an input in excess of 1000V for no longer than 1 minute.
Brand | Hioki |
---|---|
Condition | NEW |
- 1 - True-RMS AC/DC Clamp Meter, 600A AC/DC (CM4371-50)
- 1 - Wireless Adapter (Z3210)
- 1 - High Voltage Probe (P2000)
- 1 - Test Lead (L9300)
- 1 - Carrying Case (C0203)
- 2 - LR03 Alkaline Batteries
- 1 - Connection Cable (L4943)
- 1 - Strap with Buckle
- 1 - Carrying Case (C0205)
- 1 - User Manual