TREND Networks R240-PMIV
FiberMASTER Multimode/Single-Mode Power Meter with Interchangeable LC/SC/FC/ST Connectors, Video Probe Port, and VFL
TREND Networks R240-PMIV
FiberMASTER Multimode/Single-Mode Power Meter with Interchangeable LC/SC/FC/ST Connectors, Video Probe Port, and VFL
The TREND Networks R240-PMIV FiberMASTER Multimode/Single-Mode Power Meter can be used to measure attenuation in multimode or single-mode cabling or output power of equipment when paired with the user's OTDR. The R240-VIP FiberMASTER Video Inspection Probe (not included) captures images of the connector on each end of the cabling.
- Configuration includes LC/SC/FC/ST connectors, video probe port, VFL
- High dynamic range allows for troubleshooting LAN/Telecom networks
- Configured with interchangeable LC/SC/FC/ST connectors, video probe port, VFL
- Measures attenuation in multimode/single-mode cabling
- Pairs with OTDR/light source to directly measure cable attenuation/output power of optical equipment
- Supports R240-VIP FiberMASTER Video Inspection Probe (not included) to capture images of connector on each end of cabling
- High dynamic range allows for troubleshooting of LAN/Telecom networks
- VFL identifies exact location of break/micro bend/discontinuity in fiber optic cable
- Minimal training time with guided setup/testing process
- Rubber ears protect optical connectors
- Intuitive user interface for easy setup/operation
- Responsive bright color touchscreen for ease of use
- Instant boot-up for faster testing
- Lithium polymer battery offers 10 hours of continuous usage
- Handy stylus clipped onto back of tester
- Kickstand for benchtop use
- Extra-thick rubber housing protects tester
Power Meter
- Detector Type: InGaAs
- Units of Measure: dBm, dB
- Wavelength Range: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm
- Measurement Range: 5 to -77 dBm
- Uncertainty: ± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm, ± 0.35 dB from 0 to 5 dBm/-65 to -77 dBm
- Resolution: 0.01 dB
- Connector Types: LC, SC, FC, ST, 1.25 mm universal, 2.5 mm universal
VFL
- Emitter Type: Laser Photo Diode
- Wavelength Range: 650 nm ± 5 nm
- Output Power: 1 mW max.
- Connector Type: 2.5 mm universal
- Modulation Modes: CW, 1 Hz
General
- Display: 3.5 in. (8.9 cm) color resistive touchscreen
- Display Resolution: 240 x 320 px
- Dimensions: 6.69 x 4.17 x 1.97 in. (170 x 106 x 50 mm)
The TREND Networks R240-PMIV FiberMASTER Multimode/Single-Mode Power Meter offers size, simplicity, and value without any compromises. Due to the small size, the instrument is easy to carry and operate while the ruggedized housing aids in protecting the instrument. The simplified setup options makes the instrument easy to use, saving users time spent on training and reducing the likelihood of errors. This instrument enables cable installers to get the dependable test results needed, while saving users thousands of dollars.
The R240-PMIV is configured to include interchangeable LC, SC, FC, and ST connectors, a video probe port, and VFL.
The R240-PMIV can be used to measure attenuation in multimode or single-mode cabling. The instrument supports the R240-VIP FiberMASTER Video Inspection Probe (not included) to capture images of the connector on each end of the cabling. When paired with the user's OTDR and light source, the OTDR can be used to directly measure cable attenuation or to measure the output power of optical equipment for troubleshooting. The instrument's high dynamic range allows for troubleshooting of LAN and Telecom networks.
The Visual Fault Locator (VFL) emits visible red light at the 650 nm wavelength. The intended function is to allow an operator to identify the exact location of a break, micro bend, or other discontinuity in a fiber optic cable. As the radiation is visible, light emanating from a break or micro bend enables the user to locate the exact position of a fault even at very short distances that would not be detectable by conventional means such as an OTDR. This is also useful for identifying a particular fiber in a cable by exciting the fiber to be located with visible radiation.
Country of Origin | United States |
---|---|
Brand | TREND Networks |
Condition | NEW |
Vendor Alias | R240-PMIV |
- 1 - FiberMASTER Multimode/Single-Mode Power Meter (R240-PMIV)
- 1 - Multimode LC-SC Cable, 2m
- 1 - Multimode SC-SC Cable, 2m
- 1 - Single-Mode LC-SC Cable, 2m
- 1 - Single-Mode SC-SC Cable, 2m
- 1 - Cleaning Pen, 1.25 mm
- 1 - Cleaning Pen, 2.5 mm
- 2 - Styluses
- 1 - USB Cable
- 1 - Power Adapter
- 1 - User Manual