TREND Networks R240-PMLS

Our Part No. R240PMLS

Mfr. Model R240-PMLS

Skip to the end of the images gallery

Skip to the beginning of the images gallery

TREND Networks R240-PMLS

Our Part No. R240PMLS

Mfr. Model R240-PMLS

The TREND Networks R240-PMLS FiberMASTER MM/SM Power Meter and Quad Light Source Kit can be used to measure attenuation in multimode or single-mode cabling or output power of equipment when paired with the user's OTDR. The R240-VIP FiberMASTER Video Inspection Probe (not included) captures images of the connector on each end of the cabling.

Combines R240-LSIV Light Source/R240-PMIV Power Meter
VFL identifies exact location of break/micro bend/discontinuity

$3,955.05 Price $3,995.00

This item ships FREE

Key Features

Combines R240-LSIV FiberMASTER Quad Wavelength Light Source/R240-PMIV FiberMASTER Multimode/Single-Mode Power Meter
R240-LSIV configured with LC connectors, video probe port, VFL
R240-PMIV configured with interchangeable LC/SC/FC/ST connectors, video probe port, VFL
Measures attenuation in multimode/single-mode cabling
Pairs with OTDR to directly measure cable attenuation/output power of optical equipment
Supports R240-VIP FiberMASTER Video Inspection Probe (not included) to capture images of connector on each end of cabling
High dynamic range of R240-PMIV allows for troubleshooting of LAN/Telecom networks
VFL identifies exact location of break/micro bend/discontinuity in fiber optic cable
Minimal training time with guided setup/testing process
Rubber ears protect optical connectors
Intuitive user interface for easy setup/operation
Responsive bright color touchscreen for ease of use
Instant boot-up for faster testing
Lithium polymer battery offers 10 hours of continuous usage
Handy stylus clipped onto back of tester
Kickstand for benchtop use
Extra-thick rubber housing protects tester

Specifications

Light Source

Fiber Type: Single Mode, Multimode
Wavelength Range: 850 nm, 1300 nm, 1310 nm, 1550 nm, 1625 nm (determined by OTDR configuration)
Modulation Modes: CW, 270 Hz, 1000 Hz, 2000 Hz
Output Power: 1 mW max.

Power Meter

Detector Type: InGaAs
Units of Measure: dBm, dB
Wavelength Range: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm
Measurement Range: 5 to -77 dBm
Uncertainty: ± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm, ± 0.35 dB from 0 to 5 dBm/-65 to -77 dBm
Resolution: 0.01 dB
Connector Types: LC, SC, FC, ST, 1.25 mm universal, 2.5 mm universal

VFL

Emitter Type: Laser Photo Diode
Wavelength Range: 650 nm ± 5 nm
Output Power: 1 mW max.
Connector Type: 2.5 mm universal
Modulation Modes: CW, 1 Hz

General

Display: 3.5 in. (8.9 cm) color resistive touchscreen
Display Resolution: 240 x 320 px
Dimensions: 6.69 x 4.17 x 1.97 in. (170 x 106 x 50 mm)

Details

The TREND Networks R240-PMLS FiberMASTER Multimode/Single-Mode Power Meter and Quad Wavelength Light Source Kit offers size, simplicity, and value without any compromises. Due to the small size, the instruments are easy to carry and operate while the ruggedized housing aids in protecting the instruments. The simplified setup options makes the instruments easy to use, saving users time spent on training and reducing the likelihood of errors. These instruments enable cable installers to get the dependable test results needed, while saving users thousands of dollars.

The R240-PMLS kit combines both the R240-LSIV FiberMASTER Quad Wavelength Light Source and R240-PMIV FiberMASTER Multimode/Single-Mode Power Meter together in one convenient bundle. The R240-LSIV is configured to include LC connectors, a video probe port, and VFL. The R240-PMIV is configured to include interchangeable LC, SC, FC, and ST connectors, a video probe port, and VFL.

The R240-LSIV Light Source and R240-PMIV Power Meter can both be used to measure attenuation in multimode or single-mode cabling. The instruments support the R240-VIP FiberMASTER Video Inspection Probe (not included) to capture images of the connector on each end of the cabling. When paired with the user's OTDR, the OTDR can be used to directly measure cable attenuation or to measure the output power of optical equipment for troubleshooting. The R240-PMIV Power Meter's high dynamic range allows for troubleshooting of LAN and Telecom networks.

The Visual Fault Locator (VFL) emits visible red light at the 650 nm wavelength. The intended function is to allow an operator to identify the exact location of a break, micro bend, or other discontinuity in a fiber optic cable. As the radiation is visible, light emanating from a break or micro bend enables the user to locate the exact position of a fault even at very short distances that would not be detectable by conventional means such as an OTDR. This is also useful for identifying a particular fiber in a cable by exciting the fiber to be located with visible radiation.

More Information